Calibrate a Tool With UCC Server - Revision history

Slia at 12:24, 4 June 2018

2018-06-04T12:24:49Z

Admin: 5 revisions imported

2017-10-24T17:15:20Z

5 revisions imported

Admin at 16:54, 2 September 2016

2016-09-02T16:54:59Z

Admin at 16:54, 2 September 2016

2016-09-02T16:54:35Z

Admin at 16:53, 2 September 2016

2016-09-02T16:53:12Z

Admin at 16:13, 2 September 2016

2016-09-02T16:13:36Z

Admin: Created page with "To create and '''Calibrate a Tool using UCC Server''' it is necessary to: * Create a Component * Create a Tool * Calibrate the Tool In order to create the new tool, Arco sha..."

2016-09-02T16:00:24Z

Created page with "To create and '''Calibrate a Tool using UCC Server''' it is necessary to: * Create a Component * Create a Tool * Calibrate the Tool In order to create the new tool, Arco sha..."

New page

To create and '''Calibrate a Tool using UCC Server''' it is necessary to:
* Create a Component
* Create a Tool
* Calibrate the Tool

In order to create the new tool, Arco shall be off and UCC Server shall be run.

== Create a Component==
*Make sure the '''"View"''' tab on the right side on UCC Server Interface is activated
*Select the '''"Machine"''' tab
*In the any blank space: ''right click -> Add Component...'': the ''"Builder" is activated
*Build the component by selecting the correspondent items from the list
*When the component in built, click ''"Save Component"'' icon
*Type the name of the component and press ''"v"'' to confirm (press Yes to confirm)
*Click on ''"Restart Tool Assembly"'' to finish
*Select the '''"Machine"''' tab

== Create a Tool==
*Make sure the '''"View"''' tab on the right side on UCC Server Interface is activated
*Select the '''"Machine"''' tab
*In the any blank space: ''right click -> Add Tool...'': select ''"Assembly Tool"'' and press ''"v"'' to confirm
*Selecting a previously defined component from the list and press the ''"+"'' button to add it
*Click on ''"Create as New Tool"'' icon and give the tool a name. Press ''"v"'' to confirm
*Click on ''"Restart Tool Assembly"'' to finish (press Yes to confirm)
*Select the '''"Machine"''' tab

== Calibrate the Tool==
*Right Click on a previously created Tool
*Select ''"Change Tool"'' to activate (if a tool changer is present the change tool operation will be automatically performed, if it is not present, then the software will ask to detach the current component and attach the correct one if needed). '''The head will rotate without any extra warning'''.
*Right Click on the current tool (identified by a "tick" on its name)
*Select ''"Calibrate''" and follow the procedure shown byt the [[messages]] to perform the calibration.

[[Category:Generic]]
[[Category:Ph20]]

@@ Line 34: / Line 34: @@
 #Right Click on the current tool (identified by a ''"tick"'' on its name)
 #Select '''"Calibrate"''' and follow the procedure shown by the [[messages]] to perform the calibration.
 [[Category:Generic]]
 [[Category:Ph20]]

@@ Line 8: / Line 8: @@
-== Create a Component==
+==Create a Component==
 #Make sure the '''"View"''' tab on the right side on UCC Server Interface is activated
 #Select the '''"Machine"''' tab
@@ Line 19: / Line 19: @@
-== Create a Tool==
+==Create a Tool==
 #Make sure the '''"View"''' tab on the right side on UCC Server Interface is activated
 #Select the '''"Machine"''' tab
@@ Line 29: / Line 29: @@
-== Calibrate the Tool==
+==Calibrate the Tool==
 #Right Click on a previously created Tool
 #Select '''"Change Tool"''' to activate (if a tool changer is present the change tool operation will be automatically performed, if it is not present, then the software will ask to detach the current component and attach the correct one if needed). '''The head will rotate without any extra warning'''.

@@ Line 9: / Line 9: @@
 == Create a Component==
-*Make sure the '''"View"''' tab on the right side on UCC Server Interface is activated
+#Make sure the '''"View"''' tab on the right side on UCC Server Interface is activated
-*Select the '''"Machine"''' tab
+#Select the '''"Machine"''' tab
-*In the any blank space: ''right click -> Add Component...'': the '''"Builder"''' is activated
+#In the any blank space: ''right click -> Add Component...'': the '''"Builder"''' is activated
-*Build the component by selecting the correspondent items from the list
+#Build the component by selecting the correspondent items from the list
-*When the component in built, click '''"Save Component"''' icon
+#When the component in built, click '''"Save Component"''' icon
-*Type the name of the component and press '''"v"''' to confirm
+#Type the name of the component and press '''"v"''' to confirm
-*Click on '''"Restart Tool Assembly"''' icon to finish (press ''Yes'' to confirm)
+#Click on '''"Restart Tool Assembly"''' icon to create a new component or finish (press ''Yes'' to confirm). At this stage, if a new tool is being creating it is possible to [[jump]] at step 5 of the '''"Create Tool"''' procedure.
-*Select the '''"Machine"''' tab
+#Select the '''"Machine"''' tab
 == Create a Tool==
-*Make sure the '''"View"''' tab on the right side on UCC Server Interface is activated
+#Make sure the '''"View"''' tab on the right side on UCC Server Interface is activated
-*Select the '''"Machine"''' tab
+#Select the '''"Machine"''' tab
-*In the any blank space: ''right click -> '''Add Tool...''''': select '''"Assembly Tool"''' and press '''"v"''' to confirm
+#*In the any blank space: ''right click -> '''Add Tool...''''': select '''"Assembly Tool"''' and press '''"v"''' to confirm
-*Select a previously defined component from the list and press the '''"+"''' button to add it
+#Select a previously defined component from the list and press the '''"+"''' button to add it
-*Click on '''"Create as New Tool"''' icon and give the tool a name. Press '''"v"''' to confirm
+#Click on '''"Create as New Tool"''' icon and give the tool a name. Press '''"v"''' to confirm
-*Click on '''"Restart Tool Assembly"''' to finish (press ''Yes'' to confirm)
+#Click on '''"Restart Tool Assembly"''' to finish (press ''Yes'' to confirm)
-*Select the '''"Machine"''' tab
+#Select the '''"Machine"''' tab
 == Calibrate the Tool==
-*Right Click on a previously created Tool
+#Right Click on a previously created Tool
-*Select '''"Change Tool"''' to activate (if a tool changer is present the change tool operation will be automatically performed, if it is not present, then the software will ask to detach the current component and attach the correct one if needed). '''The head will rotate without any extra warning'''.
+#Select '''"Change Tool"''' to activate (if a tool changer is present the change tool operation will be automatically performed, if it is not present, then the software will ask to detach the current component and attach the correct one if needed). '''The head will rotate without any extra warning'''.
-*Right Click on the current tool (identified by a ''"tick"'' on its name)
+#Right Click on the current tool (identified by a ''"tick"'' on its name)
-*Select '''"Calibrate"''' and follow the procedure shown by the [[messages]] to perform the calibration.
+#Select '''"Calibrate"''' and follow the procedure shown by the [[messages]] to perform the calibration.
 [[Category:Generic]]
 [[Category:Ph20]]

← Older revision	Revision as of 17:15, 24 October 2017
(No difference)

@@ Line 1: / Line 1: @@
-To create and '''Calibrate a Tool using UCC Server''' it is necessary to:
+To '''create and calibrate a Tool using UCC Server''' it is necessary to:
 * Create a Component
 * Create a Tool