Key Mapping on the Different Jogboxes - Revision history

Slia at 08:29, 29 May 2019

2019-05-29T08:29:00Z

Slia at 07:43, 29 May 2019

2019-05-29T07:43:52Z

Slia at 07:42, 29 May 2019

2019-05-29T07:42:32Z

Slia at 08:56, 11 June 2018

2018-06-11T08:56:56Z

Admin: 3 revisions imported

2017-10-24T17:15:25Z

3 revisions imported

Admin at 09:51, 6 October 2017

2017-10-06T09:51:49Z

Admin at 08:44, 6 October 2017

2017-10-06T08:44:27Z

Show changes

Admin: Created page with "Each key on the various jog boxes can be associated with one or two functions depending the presence of a ''SHIFT'' button in the pad.
The function associated with the k..."

2017-10-06T08:28:40Z

Created page with "Each key on the various jog boxes can be associated with one or two functions depending the presence of a ''SHIFT'' button in the pad.<br /> The function associated with the k..."

New page

Each key on the various jog boxes can be associated with one or two functions depending the presence of a ''SHIFT'' button in the pad.<br />
The function associated with the key depends on the status of the key SHIFT. <br />
In some job box, the key SHIFT includes a signalling LED whose status ON/OFF specifies the active mode.<br />

== Renishaw MCU1 - MCU1/5 ==
{| class="wikitable sortable"
|-
! Key on Jogbox !! Function on ARCO
|-
| F1 || OK
|-
| F2 || ESC
|-
| F3 || SWITCH TO MANUAL
|-
| F4 || SAVE FEATURE / CLOSE MEASURE
|}

== Renishaw MCU Lite ==
{| class="wikitable sortable"
|-
! Key on Jogbox !! Function on ARCO
|-
| F1 || OK
|-
| F2 || ESC
|}

== Pantec HT400 ==
{| class="wikitable sortable"
|-
! Key on Jogbox !! Function on ARCO
|-
| F1 || GOTO
|-
| F2 || DELETE POINT
|-
| F3 || SWITCH TO MANUAL
|-
| F4 || SAVE FEATURE / CLOSE MEASURE
|-
| F5 || OK
|-
|F6 || MANUAL POINT / START-STOP SCAN WITH LASER
|-
| F7 || ARC GOTO
|-
| F8 || DELETE_FUNCTION
|-
| F9 || TOGGLE COLLISION
|-
| F10 || CLUTCH
|-
| F11 || RUN
|-
| F12 || ABORT
|}

== Coord3 Arkey ==

Normal mode (preset function)

Second function.

Key F1 - ESC

+ It permits the user to answer ''NO'' to the messages displayed on the PC screen.

Key SHIFT + F1 - ABORT
+ It abort the execution of a part-program (Arco F4)

Key F2 - SUSPEND/HOLD
It suspends the execution of the current part-program putting the system in a status waiting for next command. To the key F2 - SUSPEND/HOLD it is associated only one function.

The lit LED indicates that the system is in a suspend status.

If the command that follow is OK the execution will restart from the line where it was suspended.

If the command that follow is STOP/ABORT the execution of the program will end.

Key F3 - START

+ Start the execution of a part-program (Arco F5)

Key SHIFT + F3 - MOTOR ON
+ Apply the power to the motor drives of the machine. (only if present on the hw configuration of the machine).

Key F4 - OVERRIDE MAN/CNC
+ It permits to go in manual move mode, here the machine axes could be moved manually by the user using the joystick, even if the system is in CNC mode. The command, anyway, generates no instructions in the part-program. This function is active only under CNC mode. The lit LED indicates that the OVERRIDE MAN/CNC mode is active.

Key SHIFT + F4 - MOTOR OFF
+ IThe flashing LED indicates that ''MOTOR-OFF'' mode is active or the machine is in de-cluthed mode. (this function is present for Viewer V25 and machines with mechanical clutches)

Key F5 - SWAP ARM
+ On measuring systems with two arms allow to swap the control between them. The current controlled arm is signalled by the corresponding lit up LED. The use of the key F5 - SWAP ARM doesn't have any effect on single arm measuring systems.

Key SHIFT + F5 - SWAP KEYBOARD
+ On measuring systems with two teach pendent it allow the user to switch the control of the first ''Arkey'' to the second one. The active teach pendent is indicated by the corresponding lit up LED. The key SHIFT + F5 - SWAP axes doesn't have any effect on measuring systems with a single teach pendent.

Key F6 - MANUAL SPEED
+ The flashing LED indicates that MANUAL SPEED mode is active. In manual measuring mode it allow the joystick to move the machine with a speed as it was in manual mode.

Key SHIFT + F6 - MICRO CNC
+ The lit LED indicates that MICRO-CNC mode is active. In manual mode it enable a micrometry moving of the machine axes with the joystick.

Key F7 - GOTO

+ If it's pressed it writes a GOTO instruction in the part-program, taking the current machine position.

Key SHIFT + F7 - GOTO ARC
+ + If it's pressed it writes a GOTO-ARC in the part-program.

Key F8 - SWAP-axes TO ROTARY
By default the 3 joystick levers move the machine axes (X, Y and Z). The function associated to the F8 key enable to swap the joystick associated moving function of these axes. The use of the key F8 - SWAP-axes doesn't have any effect on measuring systems without the fourth axes or a motorized probe. Two cases are possible:

Machine with rotary table

+ the joystick levers move the fourth axes when it is a rotary table. The table rotation has effect by rotating the Z joystick lever: rotating it clockwise the table will rotate in clockwise direction and vice-versa.

Machine with rotary head

+ The joystick move the two rotary axes of the motorized probe-head. The rotation of the ROLL axes is possible by rotating the Z axes of the joystick: rotating it clockwise the probe-head will rotate in clockwise direction and vice-versa. The rotation of the PITCH is possible by moving the X axes lever of the joystick.

Key F9 - FEATURE AUTO-ACKNOWLEDGEMENT
It opens the feature auto-acknowledgement with the automatic acknowledgement of a geometric element, and once achieved the geometry-minimum points number will calculate it.

Key F10 - MANUAL POINT

+ It permits the user to get as measured point the current position.

Key SHIFT + F10 - PROBE DISABLE
+ It disable the probe.

Key F11 - DELETE POINT

+ It cancels the last taken point during a feature acquisition. Please note that, during the execution of a part-program in manual mode or during the acquisition of features in decrement mode, it's not possible to delete last picked point among those foreseen for that specific feature, because the measuring system, once latest point has been picked, immediately executes the calculation of the feature.

Key F11 - DELETE ALL POINTS
+ By pressing key F11 it is possible to delete all points (by re-starting the measure session)

Key F12 - X LOCK
+ Inhibit the X axes movement of the machine. On enabled systems (e.g.: tracing machines with Viewer V25 application) the machine axes is physically locked, by means of an appropriate brake. The lit LED indicates that machine X axes is locked.

Key F12 - X RESET
+ On enabled systems set X = 0 the value of the X coordinate of the machine in the current position (e.g.: tracing machines with Viewer V25 application)

Key F13 - Y LOCK
+ Inhibit the Y axes movement of the machine. On enabled systems (e.g.: tracing machines with Viewer V25 application) the machine axes is physically locked, by mean of an appropriate brake. The lit LED indicates that machine Y axes is locked.

Key F13 - Y RESET
+ On enabled systems set X = 0 the value of the X coordinate of the machine in the current position. (e.g.: tracing machines with Viewer V25 application)

Key F14 - Z LOCK
+ Inhibit the Z axes movement of the machine. On enabled systems (e.g.: tracing machines with Viewer V25 application) the machine axes is physically locked, by mean of an appropriate brake. The lit LED indicates that machine Z axes is locked.

Key F14 - Z RESET
+ On enabled systems set X = 0 the value of the X coordinate of the machine in the current position. (e.g.: tracing machines with Viewer V25 application)

Key OK - START ENTER

It allows to confirm the messages that appear on the PC screen.

@@ Line 38: / Line 38: @@
 | F3 ||  F3 || SWITCH TO MANUAL / OVERRIDE CNC
 |-
-| F4 ||  F4 || SAVE FEATURE / CLOSE MEASURE
+| F4 ||  F4 || TOGGLE CNC SPEED FROM SLOW TO FAST
 |-
-| F5 ||  F5 || Toggle CMM speed from SLOW to FAST
+| F5 ||  F5 || ENTER KEY FOR MESSAGES CONFIRMATION
 |-
 | F6 ||  F6 || MANUAL POINT / START-STOP SCAN WITH LASER

@@ Line 40: / Line 40: @@
 | F4 ||  F4 || SAVE FEATURE / CLOSE MEASURE
 |-
-| F5 ||  F5 || Key F5 - SWAP ARM +  On measuring systems with two arms allow to swap the control between them. The current controlled arm is signalled by the corresponding lit up LED. The use of the key F5 - SWAP ARM doesn't have any effect on single arm measuring systems.
+| F5 ||  F5 || Toggle CMM speed from SLOW to FAST
 |-
 | F6 ||  F6 || MANUAL POINT / START-STOP SCAN WITH LASER
@@ Line 77: / Line 77: @@
 | F7 ||  F7 || GOTO || Writes a GOTO instruction in the part-program, taking the current machine position.
 |-
-| F8 ||  F8 || SWAP-axes TO ROTARY. By default the 3 joystick levers move the machine axes (X, Y and Z). The function associated to the F8 key enable to swap the joystick associated moving function of these axes. The use of the key F8 - SWAP-axes doesn't have any effect on measuring systems without the fourth axes or a motorized probe. Two cases are possible:Machine with [[Rotary Table|rotary table]] +   the joystick levers move the fourth axes when it is a rotary table. The table rotation has effect by rotating the Z joystick lever: rotating it clockwise the table will rotate in clockwise direction and vice-versa.Machine with rotary head +  The joystick move the two rotary axes of the motorized probe-head. The rotation of the ROLL axes is possible by rotating the Z axes of the joystick: rotating it clockwise the probe-head will rotate in clockwise direction and vice-versa. The rotation of the PITCH is possible by moving the X axes lever of the joystick.
+| F8 ||  F8 || SWAP-axes TO ROTARY. By default the 3 joystick levers move the machine axes (X, Y and Z). The function associated to the F8 key enable to swap the joystick associated moving function of these axes. The use of the key F8 - SWAP-axes doesn't have any effect on measuring systems without the fourth axes or a motorized probe. Two cases are possible:Machine with [[Rotary Table|rotary table]] +   the joystick levers move the fourth axes when it is a [[Rotary Table|rotary table]]. The table rotation has effect by rotating the Z joystick lever: rotating it clockwise the table will rotate in clockwise direction and vice-versa.Machine with rotary head +  The joystick move the two rotary axes of the motorized probe-head. The rotation of the ROLL axes is possible by rotating the Z axes of the joystick: rotating it clockwise the probe-head will rotate in clockwise direction and vice-versa. The rotation of the PITCH is possible by moving the X axes lever of the joystick.
 |-

@@ Line 27: / Line 27: @@
 |}
-==  Pantec HT400 ==
+==  Pantec HT400 / Eagle Pad / Smart Pad==
 {| class="wikitable sortable"
 |-
@@ Line 77: / Line 77: @@
 | F7 ||  F7 || GOTO || Writes a GOTO instruction in the part-program, taking the current machine position.
 |-
-| F8 ||  F8 || SWAP-axes TO ROTARY. By default the 3 joystick levers move the machine axes (X, Y and Z). The function associated to the F8 key enable to swap the joystick associated moving function of these axes. The use of the key F8 - SWAP-axes doesn't have any effect on measuring systems without the fourth axes or a motorized probe. Two cases are possible:Machine with rotary table +   the joystick levers move the fourth axes when it is a rotary table. The table rotation has effect by rotating the Z joystick lever: rotating it clockwise the table will rotate in clockwise direction and vice-versa.Machine with rotary head +  The joystick move the two rotary axes of the motorized probe-head. The rotation of the ROLL axes is possible by rotating the Z axes of the joystick: rotating it clockwise the probe-head will rotate in clockwise direction and vice-versa. The rotation of the PITCH is possible by moving the X axes lever of the joystick.
+| F8 ||  F8 || SWAP-axes TO ROTARY. By default the 3 joystick levers move the machine axes (X, Y and Z). The function associated to the F8 key enable to swap the joystick associated moving function of these axes. The use of the key F8 - SWAP-axes doesn't have any effect on measuring systems without the fourth axes or a motorized probe. Two cases are possible:Machine with [[Rotary Table|rotary table]] +   the joystick levers move the fourth axes when it is a rotary table. The table rotation has effect by rotating the Z joystick lever: rotating it clockwise the table will rotate in clockwise direction and vice-versa.Machine with rotary head +  The joystick move the two rotary axes of the motorized probe-head. The rotation of the ROLL axes is possible by rotating the Z axes of the joystick: rotating it clockwise the probe-head will rotate in clockwise direction and vice-versa. The rotation of the PITCH is possible by moving the X axes lever of the joystick.
 |-

← Older revision		Revision as of 08:56, 11 June 2018
Line 113:		Line 113:
	Key F14 - Z RESET + On enabled systems set X = 0 the value of the X coordinate of the machine in the current position. (e.g.: tracing machines with Viewer V25 application)		Key F14 - Z RESET + On enabled systems set X = 0 the value of the X coordinate of the machine in the current position. (e.g.: tracing machines with Viewer V25 application)
	Key OK - START ENTER It allows to confirm the [[messages]] that appear on the PC screen.		Key OK - START ENTER It allows to confirm the [[messages]] that appear on the PC screen.
		+
		+
		+	[[it:Mappatura dei tasti sui diversi Jogbox]]
		+	[[zh-cn:关键点映射在不同的Jogboxes上]]
		+	[[pt:Mapeamento de Chaves nas Diferentes Jogboxes]]
		+	[[de:Key Mapping auf die verschiedenen Jogboxen]]
		+	[[es:Asignación de teclas en los diferentes Jogboxes]]
		+	[[en:Key Mapping on the Different Jogboxes]]

@@ Line 41: / Line 41: @@
 |-
 | F5 ||  F5 || Key F5 - SWAP ARM +  On measuring systems with two arms allow to swap the control between them. The current controlled arm is signalled by the corresponding lit up LED. The use of the key F5 - SWAP ARM doesn't have any effect on single arm measuring systems.
 |-
 | F6 ||  F6 || MANUAL POINT / START-STOP SCAN WITH LASER
@@ Line 60: / Line 59: @@
 ==  Coord3 Arkey ==
+{| class="wikitable sortable"
-! Key on Jogbox !! Combination !! Function on ARCO
+|-
 |-
 | F1 ||  F1 || ESC || Allows the user to answer ''NO'' to the [[messages]] displayed on the PC screen.
 |-
-| F2 ||  F2 || SUSPEND/HOLD ||  It suspends the execution of the current part-program putting the system in a status waiting for next command. Followed by ''OK'' the execution will resume, followed is STOP/ABORT the execution
+| F2 ||  F2 || SUSPEND/HOLD ||  It suspends the execution of the current part-program putting the system in a status waiting for next command. Followed by ''OK'' the execution will resume, followed is STOP/ABORT the execution will stop.
 |-
 | F3 ||  F3 || START ||  Start the execution of a part-program
@@ Line 72: / Line 71: @@
 | F4 ||  F4 ||  SWITCH TO MANUAL / OVERRIDE CNC || Allows to go in manual move mode while the program is set to CNC.
 |-
-| F5 ||  F5 || OK
+| F5 ||  F5 || SWAP ARM ||On measuring systems with two arms allows to swap the control between them. The current controlled arm is signalled by the corresponding lit up LED. This key doesn't have any effect on single arm measuring systems. ('''Now Obsolete''')
 |-
-| F6 ||  F6 || MANUAL POINT / START-STOP SCAN WITH LASER
+| F6 ||  F6 || MANUAL SPEED || In manual measuring mode it allows the joystick to move the machine with a speed as it was in manual mode.
 |-
-| F7 ||  F1 + SHIFT || ARC GOTO
+| F7 ||  F7 || GOTO || Writes a GOTO instruction in the part-program, taking the current machine position.
 |-
-| F8 ||  F2 + SHIFT || DELETE_FUNCTION
+| F8 ||  F8 || SWAP-axes TO ROTARY. By default the 3 joystick levers move the machine axes (X, Y and Z). The function associated to the F8 key enable to swap the joystick associated moving function of these axes. The use of the key F8 - SWAP-axes doesn't have any effect on measuring systems without the fourth axes or a motorized probe. Two cases are possible:Machine with rotary table +   the joystick levers move the fourth axes when it is a rotary table. The table rotation has effect by rotating the Z joystick lever: rotating it clockwise the table will rotate in clockwise direction and vice-versa.Machine with rotary head +  The joystick move the two rotary axes of the motorized probe-head. The rotation of the ROLL axes is possible by rotating the Z axes of the joystick: rotating it clockwise the probe-head will rotate in clockwise direction and vice-versa. The rotation of the PITCH is possible by moving the X axes lever of the joystick.
 |-
 | F9 ||  F3 + SHIFT || TOGGLE COLLISION
@@ Line 99: / Line 99: @@
 Key SHIFT + F4 - MOTOR OFF  +  IThe flashing LED indicates that ''MOTOR-OFF'' mode is active or the machine is in de-cluthed mode. (this function is present for Viewer V25 and machines with mechanical clutches)
 Key SHIFT + F5 - SWAP KEYBOARD +  On measuring systems with two teach pendent it allow the user to switch the control of the first ''Arkey'' to the second one. The active teach pendent is indicated by the corresponding lit up LED. The key SHIFT + F5 - SWAP axes doesn't have any effect on measuring systems with a single teach pendent.
 Key SHIFT + F6 - MICRO CNC + The lit LED indicates that MICRO-[[CNC Mode|CNC mode]] is active. In manual mode it enable a micrometry moving of the machine axes with the joystick.
 Key SHIFT + F7 - GOTO ARC +  +  If it's pressed it writes a GOTO-ARC in the part-program.
 Key F9 - FEATURE AUTO-ACKNOWLEDGEMENT It opens the feature auto-acknowledgement with the automatic acknowledgement of a geometric element, and once achieved the geometry-minimum points number will calculate it.
 Key F10 - MANUAL POINT  +  It permits the user to get as measured point the current position.

← Older revision	Revision as of 17:15, 24 October 2017
(No difference)