Difference between revisions of "Thermal Compensation in Arco"
From ArcoWiki
(Created page with "it:Compensazione Termica in Arco == Manual Thermal Compensation == == Automatic Thermal Compensation == ") |
|||
| Line 1: | Line 1: | ||
[[it:Compensazione Termica in Arco]] | [[it:Compensazione Termica in Arco]] | ||
| − | == Manual Thermal Compensation == | + | |
| − | == Automatic Thermal Compensation == | + | == Setting the Manual Thermal Compensation == |
| + | The Manual Thermal Compensation needs to be configured in Arco Control Panel, precisely, 2 settings shall be done: | ||
| + | |||
| + | * In the ''Machine'' group, click on the ''Axis Setup'' button and set to correct expansion coefficient for each axis in the frame ''Thermal Expansion Coefficients''.<br /> | ||
| + | * In the ''Advanced'' group, open the ''Compensation'' tab and set to ''Manual'' the ''Thermal Compensation'' combo Box.<br /> | ||
| + | * Save the Setting before Exit and tart Arco.<br /> | ||
| + | |||
| + | <gallery> | ||
| + | File:ThermalManual1.jpg| | ||
| + | File:ThermalManual2.png| | ||
| + | </gallery> | ||
| + | |||
| + | |||
| + | == Setting the Automatic Thermal Compensation == | ||
| + | The Automatic Thermal Compensation needs to be configured in Arco Control Panel, precisely, 2 settings shall be done: | ||
| + | |||
| + | * In the ''Machine'' group, click on the ''Axis Setup'' button and set to correct expansion coefficient for each axis in the frame ''Thermal Expansion Coefficients''.<br /> | ||
| + | * Define the type on connection in the ''Connected To'' | ||
| + | * Select the appropriate ''Probes Characterization File'' (the default file it is defined [[Thermal Default File|here]]. | ||
| + | * Save the Setting before Exit and tart Arco.<br /> | ||
| + | |||
| + | <gallery> | ||
| + | File:ThermalAuto1.png| | ||
| + | File:ThermalAuto2.PNG| | ||
| + | </gallery> | ||
| + | |||
| + | == Using the Manual Thermal Compensation == | ||
| + | From the ''Option'' panel, it is necessary to enable the thermal compensation of the Axis, Part or Both.<br /> | ||
| + | * In case the part compensation is to enabled, then the expansion coefficient of the material to be used shall be define in or the send to the program the correct value.<br/> | ||
| + | * In the menu ''System'' of Arco, it necessary to seto the current temperature.<br/> | ||
| + | '''Since it a manual thermal compensation, it is responsibility of the user to set the correct values!'''<br/> | ||
| + | <gallery> | ||
| + | File:ActivateThermal.jpg| | ||
| + | File:ThermalManual3.jpg| | ||
| + | </gallery> | ||
| + | |||
| + | == Using the Automatic Thermal Compensation == | ||
| + | From the ''Option'' panel, it is necessary to enable the thermal compensation of the Axis, Part or Both.<br /> | ||
| + | * In case the part compensation is to enabled, then the expansion coefficient of the material to be used shall be define in or the send to the program the correct value.<br/> | ||
| + | * In of multiple probes for the part, is it necessary to set which probe is to be used, or in case of the need of an average value, both probes.<br/> | ||
| + | * The value used for the thermal compensation are taken directly from the hardware and shown in the DRO.<br/> | ||
| + | <gallery> | ||
| + | File:ActivateThermal.jpg| | ||
| + | </gallery> | ||
| + | |||
| + | [[Category:Help_On_Line]] | ||
Revision as of 10:26, 2 October 2017
Contents
Setting the Manual Thermal Compensation
The Manual Thermal Compensation needs to be configured in Arco Control Panel, precisely, 2 settings shall be done:
- In the Machine group, click on the Axis Setup button and set to correct expansion coefficient for each axis in the frame Thermal Expansion Coefficients.
- In the Advanced group, open the Compensation tab and set to Manual the Thermal Compensation combo Box.
- Save the Setting before Exit and tart Arco.
Setting the Automatic Thermal Compensation
The Automatic Thermal Compensation needs to be configured in Arco Control Panel, precisely, 2 settings shall be done:
- In the Machine group, click on the Axis Setup button and set to correct expansion coefficient for each axis in the frame Thermal Expansion Coefficients.
- Define the type on connection in the Connected To
- Select the appropriate Probes Characterization File (the default file it is defined here.
- Save the Setting before Exit and tart Arco.
Using the Manual Thermal Compensation
From the Option panel, it is necessary to enable the thermal compensation of the Axis, Part or Both.
- In case the part compensation is to enabled, then the expansion coefficient of the material to be used shall be define in or the send to the program the correct value.
- In the menu System of Arco, it necessary to seto the current temperature.
Since it a manual thermal compensation, it is responsibility of the user to set the correct values!
Using the Automatic Thermal Compensation
From the Option panel, it is necessary to enable the thermal compensation of the Axis, Part or Both.
- In case the part compensation is to enabled, then the expansion coefficient of the material to be used shall be define in or the send to the program the correct value.
- In of multiple probes for the part, is it necessary to set which probe is to be used, or in case of the need of an average value, both probes.
- The value used for the thermal compensation are taken directly from the hardware and shown in the DRO.
