Difference between revisions of "Disk Probe Calibration"

From ArcoWiki
Jump to: navigation, search
 
Line 13: Line 13:
 
|<li>Consider, for a good calibration to let the sphere to be measure with at least 9 points||[[File:NumberOf Point For Disk.png|thumb|right|300px]]
 
|<li>Consider, for a good calibration to let the sphere to be measure with at least 9 points||[[File:NumberOf Point For Disk.png|thumb|right|300px]]
 
|}
 
|}
 +
[[it:Calibrazione della sonda del disco]]
 +
[[zh-cn:磁盘探测器校准]]
 +
[[pt:Calibração de sonda de disco]]
 +
[[de:Disk Probe Kalibrierung]]
 +
[[es:Calibración de la sonda de disco]]
 +
[[en:Disk Probe Calibration]]
  
 
[[Category:Dmis_Tutorial]]
 
[[Category:Dmis_Tutorial]]
 
[[Category:Help_On_Line]]
 
[[Category:Help_On_Line]]
 
[[Category:ReadMe3.6]]
 
[[Category:ReadMe3.6]]

Latest revision as of 13:22, 6 June 2018

It is possible to calibrate DISK probe using the Calibration Wizard.
The implementation at version 3.6 requires a manual modification of the program in order to have the disk calibrated.
The procedure to be followed is:

  • Create a calibration Wizard of the disk probe selecting the graphical definition and all the required angles to be calibrated.
    		•
    Disk Definition.png
  • The Wizard creates a standard definition of the probe, without any definition of the disk, that shall be add manually
    		•
    DiskDefinition In Program.png
  • In order define the disk probe it is necessary to add, as last parameter on each disk definition, the following code ,DISK,height where height represent the height of the disk
    		•
    Definition Complete.png
  • Consider, for a good calibration to let the sphere to be measure with at least 9 points
    		•
    NumberOf Point For Disk.png
    Retrieved from "https://en.arcowiki.com/index.php?title=Disk_Probe_Calibration&oldid=2152"