Difference between revisions of "Laser data decimation ratio"

From ArcoWiki
Jump to: navigation, search
(Created page with " Category:ReadMe3.6")
 
 
(2 intermediate revisions by one other user not shown)
Line 1: Line 1:
 +
From Version 3.6 it is implemented the possibility of decimate the number of points coming for a laser scanner.<br />
 +
The decimation parameters are set in the ''[[whitestar.ini]]'' file and they are applied to :
  
 +
* Input Points from the scanner
 +
**Use the entry ''Laser data decimation ratio (1.0000-0.0001)=1.00000000'' where 1 means 100% of points taken.
 +
* Point Cloud Visualization
 +
**Use the entry ''Point cloud coarse grid step ( > 0.001)=0.20000000'' to define the step of the visualization grid
 +
* Surface analysis
 +
**Use the entry ''Point cloud fine grid step ( > 0.001)=0.02500000'' to define the step of the measuring grid
  
 +
[[it:Rapporto di decimazione dei dati laser]]
 +
[[zh-cn:激光数据抽取比]]
 +
[[pt:Razão de dizimação de dados a laser]]
 +
[[de:Laser-Daten-Dezimationsverhältnis]]
 +
[[es:Proporción de decimación de datos láser]]
 +
[[en:Laser data decimation ratio]]
 +
 +
[[Category:Help_On_Line]]
 
[[Category:ReadMe3.6]]
 
[[Category:ReadMe3.6]]

Latest revision as of 09:29, 11 June 2018

From Version 3.6 it is implemented the possibility of decimate the number of points coming for a laser scanner.
The decimation parameters are set in the whitestar.ini file and they are applied to :

  • Input Points from the scanner
    • Use the entry Laser data decimation ratio (1.0000-0.0001)=1.00000000 where 1 means 100% of points taken.
  • Point Cloud Visualization
    • Use the entry Point cloud coarse grid step ( > 0.001)=0.20000000 to define the step of the visualization grid
  • Surface analysis
    • Use the entry Point cloud fine grid step ( > 0.001)=0.02500000 to define the step of the measuring grid