Difference between revisions of "Ballooning Report with Tolerance Name"
| Line 1: | Line 1: | ||
| − | [[File:BaloonedReport.jpg|thumb|right|600px|'' | + | [[File:BaloonedReport.jpg|thumb|right|600px|''Ballooned Report Example from Solid Works'''™''''']] |
From Version 3.6 it is implemented the possibility of creating HTML, EXCEL or TEXT reports with the name of the tolerance as label of the feature instead of the characteristic as previously possible in version 3.5.<br /> | From Version 3.6 it is implemented the possibility of creating HTML, EXCEL or TEXT reports with the name of the tolerance as label of the feature instead of the characteristic as previously possible in version 3.5.<br /> | ||
This application is typically used in the so called ''"Ballooning Reporting"'' or ''"First Inspection Report"'', in which the items are ''"Balooned"'' on the drawing with a progressing number and need to be shown in the same order in the text measuring report.<br /> | This application is typically used in the so called ''"Ballooning Reporting"'' or ''"First Inspection Report"'', in which the items are ''"Balooned"'' on the drawing with a progressing number and need to be shown in the same order in the text measuring report.<br /> | ||
| − | + | == Example of a standard HTML and TEXT report == | |
| − | Example of | ||
<br /> | <br /> | ||
<code> | <code> | ||
| Line 35: | Line 34: | ||
<br /> | <br /> | ||
In the Example, the label in the reports show the characteristic of the features, but, in the hypothetical drawing, the output lines would had be marked as balloons 1,2,3 etc.; under that condition the report won't fulfill the requirement of showing the balloons.<br /> | In the Example, the label in the reports show the characteristic of the features, but, in the hypothetical drawing, the output lines would had be marked as balloons 1,2,3 etc.; under that condition the report won't fulfill the requirement of showing the balloons.<br /> | ||
| − | In order to make the report compliant, possible solution would be necessary to use individual <code>TEXT/OUTFIL</code> specifying the correct balloon: | + | |
| + | == Example of a standard HTML and TEXT report with Comments == | ||
| + | In order to make the report compliant, a possible solution would be necessary to use individual <code>TEXT/OUTFIL</code> specifying the correct balloon: | ||
<br /> | <br /> | ||
<code> | <code> | ||
| Line 82: | Line 83: | ||
<br /> | <br /> | ||
== Use of the Tolerance Name in ARCO Report == | == Use of the Tolerance Name in ARCO Report == | ||
| − | By setting the | + | By setting the ''Use Tolerance name'' in ARCO ''Control Panel'' the report would carry, instead of the label of the characteristic, the tolerance name, that would allow to create a ballooned report.<br /> |
| + | The following code:<br/> | ||
<br /> | <br /> | ||
<code> | <code> | ||
| Line 105: | Line 107: | ||
OUTPUT/FA(C1),TA(BALLOON_4),TA(BALLOON_5),TA(BALLOON_5),TA(BALLOON_6)<br /> | OUTPUT/FA(C1),TA(BALLOON_4),TA(BALLOON_5),TA(BALLOON_5),TA(BALLOON_6)<br /> | ||
DISPLY/OFF<br /> | DISPLY/OFF<br /> | ||
| + | </code> | ||
| + | <br /> | ||
| + | <br /> | ||
| + | would produce the following output: | ||
| + | <br /> | ||
<br /> | <br /> | ||
| + | <gallery widths=600x heights=300px caption="Standard Report using the Tolerance Name"> | ||
| + | File:TextReport3.PNG|Text | ||
| + | File:HtmlReport3.PNG|HTML | ||
| + | </gallery> | ||
<br /> | <br /> | ||
| − | + | <br />== Setting the Tolerance Name in ARCO Control Panel == | |
| − | </ | + | [[File:UseToleranceName.png|thumb|right|600px|''Setting the Use Of Tolerance Name'']] |
| − | |||
[[it:Creazione Di Report con Identificazione degli Item da Pallinato]] | [[it:Creazione Di Report con Identificazione degli Item da Pallinato]] | ||
Revision as of 17:06, 13 October 2017
From Version 3.6 it is implemented the possibility of creating HTML, EXCEL or TEXT reports with the name of the tolerance as label of the feature instead of the characteristic as previously possible in version 3.5.
This application is typically used in the so called "Ballooning Reporting" or "First Inspection Report", in which the items are "Balooned" on the drawing with a progressing number and need to be shown in the same order in the text measuring report.
Example of a standard HTML and TEXT report
F(P1)=FEAT/POINT,CART,0.0000,0.0000,0.0000,0.00000000,0.00000000,1.00000000
F(C1)=FEAT/CIRCLE,INNER,CART,0.0000,0.0000,0.0000,0.00000000,0.00000000,1.00000000,20.0000
FA(P1)=FEAT/POINT,CART,0.10000,0.10000,0.10000,0.00000000,0.00000000,1.00000000
FA(C1)=FEAT/CIRCLE,INNER,CART,0.20000,0.10000,0.20000,0.00000000,0.00000000,1.00000000,20.30000
V(TEXT)=VFORM/ALL
V(HTML)=VFORM/DME,'HTM',ALL
DISPLY/TERM,V(TEXT)
DISPLY/STOR,V(HTML)
F(P1)=FEAT/POINT,CART,0.0000,0.0000,0.0000,0.00000000,0.00000000,1.00000000
T(CORTOL_1)=TOL/CORTOL,XAXIS,-1.0000,1.0000
T(CORTOL_2)=TOL/CORTOL,YAXIS,-1.0000,2.0000
T(CORTOL_3)=TOL/CORTOL,ZAXIS,-3.0000,3.0000
OUTPUT/FA(P1),TA(CORTOL_1),TA(CORTOL_2),TA(CORTOL_3)
F(C1)=FEAT/CIRCLE,INNER,CART,0.0000,0.0000,0.0000,0.00000000,0.00000000,1.00000000,20.0000
T(DIAM_1)=TOL/DIAM,-1.0000,1.0000
OUTPUT/FA(C1),TA(CORTOL_1),TA(CORTOL_2),TA(CORTOL_3),TA(DIAM_1)
DISPLY/OFF
The above code would produce an HTML and TEXT report as follow:
- Standard Report
Text
HTML
In the Example, the label in the reports show the characteristic of the features, but, in the hypothetical drawing, the output lines would had be marked as balloons 1,2,3 etc.; under that condition the report won't fulfill the requirement of showing the balloons.
Example of a standard HTML and TEXT report with Comments
In order to make the report compliant, a possible solution would be necessary to use individual TEXT/OUTFIL specifying the correct balloon:
F(P1)=FEAT/POINT,CART,0.0000,0.0000,0.0000,0.00000000,0.00000000,1.00000000
F(C1)=FEAT/CIRCLE,INNER,CART,0.0000,0.0000,0.0000,0.00000000,0.00000000,1.00000000,20.0000
FA(P1)=FEAT/POINT,CART,0.10000,0.10000,0.10000,0.00000000,0.00000000,1.00000000
FA(C1)=FEAT/CIRCLE,INNER,CART,0.20000,0.10000,0.20000,0.00000000,0.00000000,1.00000000,20.30000
V(TEXT)=VFORM/ALL
V(HTML)=VFORM/DME,'HTM',ALL
DISPLY/TERM,V(TEXT)
DISPLY/STOR,V(HTML)
F(P1)=FEAT/POINT,CART,0.0000,0.0000,0.0000,0.00000000,0.00000000,1.00000000
T(CORTOL_1)=TOL/CORTOL,XAXIS,-1.0000,1.0000
T(CORTOL_2)=TOL/CORTOL,YAXIS,-1.0000,2.0000
T(CORTOL_3)=TOL/CORTOL,ZAXIS,-3.0000,3.0000
TEXT/OUTFIL,'BALLOON 1'
OUTPUT/FA(P1),TA(CORTOL_1)
TEXT/OUTFIL,'BALLOON 2'
OUTPUT/FA(P1),TA(CORTOL_2)
TEXT/OUTFIL,'BALLOON 3'
OUTPUT/FA(P1),TA(CORTOL_3)
F(C1)=FEAT/CIRCLE,INNER,CART,0.0000,0.0000,0.0000,0.00000000,0.00000000,1.00000000,20.0000
T(DIAM_1)=TOL/DIAM,-1.0000,1.0000
TEXT/OUTFIL,'BALLOON 4'
OUTPUT/FA(C1),TA(CORTOL_1)
TEXT/OUTFIL,'BALLOON 5'
OUTPUT/FA(C1),TA(CORTOL_2)
TEXT/OUTFIL,'BALLOON 7'
OUTPUT/FA(C1),TA(CORTOL_3)
TEXT/OUTFIL,'BALLOON 8'
OUTPUT/FA(C1),TA(DIAM_1)
DISPLY/OFF
The above code would produce an HTML and TEXT report as follow:
- Standard Report with Comments
Text
HTML
In the Example, the comment help to identify the balloon, but still the programming would be incremented.
Use of the Tolerance Name in ARCO Report
By setting the Use Tolerance name in ARCO Control Panel the report would carry, instead of the label of the characteristic, the tolerance name, that would allow to create a ballooned report.
The following code:
F(P1)=FEAT/POINT,CART,0.0000,0.0000,0.0000,0.00000000,0.00000000,1.00000000
F(C1)=FEAT/CIRCLE,INNER,CART,0.0000,0.0000,0.0000,0.00000000,0.00000000,1.00000000,20.0000
FA(P1)=FEAT/POINT,CART,0.10000,0.10000,0.10000,0.00000000,0.00000000,1.00000000
FA(C1)=FEAT/CIRCLE,INNER,CART,0.20000,0.10000,0.20000,0.00000000,0.00000000,1.00000000,20.30000
V(TEXT)=VFORM/ALL
V(HTML)=VFORM/DME,'HTM',ALL
DISPLY/TERM,V(TEXT)
DISPLY/STOR,V(HTML)
F(P1)=FEAT/POINT,CART,0.0000,0.0000,0.0000,0.00000000,0.00000000,1.00000000
T(BALLOON_1)=TOL/CORTOL,XAXIS,-1.0000,1.0000
T(BALLOON_2)=TOL/CORTOL,YAXIS,-1.0000,2.0000
T(BALLOON_3)=TOL/CORTOL,ZAXIS,-3.0000,3.0000
OUTPUT/FA(P1),TA(BALLOON_1),TA(BALLOON_2),TA(BALLOON_3)
F(C1)=FEAT/CIRCLE,INNER,CART,0.0000,0.0000,0.0000,0.00000000,0.00000000,1.00000000,20.0000
T(BALLOON_4)=TOL/CORTOL,XAXIS,-1.0000,1.0000
T(BALLOON_5)=TOL/CORTOL,YAXIS,-1.0000,2.0000
T(BALLOON_6)=TOL/CORTOL,ZAXIS,-3.0000,3.0000
T(BALLOON_7)=TOL/DIAM,-1.0000,1.0000
OUTPUT/FA(C1),TA(BALLOON_4),TA(BALLOON_5),TA(BALLOON_5),TA(BALLOON_6)
DISPLY/OFF
would produce the following output:
- Standard Report using the Tolerance Name
Text
HTML
== Setting the Tolerance Name in ARCO Control Panel ==
