Difference between revisions of "Hardware Interface 3.2.30"
From ArcoWiki
| (One intermediate revision by one other user not shown) | |||
| Line 12: | Line 12: | ||
'''Pantec Controller: '''Implemented the possibility move the CMM on Part Coordinate System using the Joystick (This function can be activated pressing SHIFT + F4 on HT400 or a compatible hand box) | '''Pantec Controller: '''Implemented the possibility move the CMM on Part Coordinate System using the Joystick (This function can be activated pressing SHIFT + F4 on HT400 or a compatible hand box) | ||
| + | |||
| + | [[it:Interfaccia hardware 3.2.30]] | ||
| + | [[zh-cn:硬件接口3.2.30]] | ||
| + | [[pt:Interface de Hardware 3.2.30]] | ||
| + | [[de:Hardwareschnittstelle 3.2.30]] | ||
| + | [[es:Interfaz de hardware 3.2.30]] | ||
| + | [[en:Hardware Interface 3.2.30]] | ||
[[Category:ReadMe3.2.30]] | [[Category:ReadMe3.2.30]] | ||
Latest revision as of 08:32, 7 June 2018
B3C Controller: Integrated the communication with Dea/Hexagon controller model B3C using protocol format “Leitz” on serial line.
Capabilities limited to point to point inspection.
Cimcore 3000i arm: Integration of the serial communication with CimCore 3000i arm on software Winrds 5.3.4.
RD77 board: Implementation of the home using reference marker.
ENC 7480 board: Implementation of the home using reference marker.
SP600 Probe: implementation of the SP600 probe on Pantec Controller
Pantec Controller: Implemented the possibility move the CMM on Part Coordinate System using the Joystick (This function can be activated pressing SHIFT + F4 on HT400 or a compatible hand box)
