Writing SerialPort
From ArcoWiki
Revision as of 16:45, 10 September 2016 by Unknown user (talk)
It is possible to write data on a serial port through the DMIS code, for example:
DECL/CHAR,10,my_var
DECL/INTGR,ii
my_var=ASSIGN/'Here the value assigned!'
DID(my_com_device)=DEVICE/COMM,'com3:9600,n,8,1'
OPEN/DID(my_com_device),DIRECT,INPUT
DO/ii,1,10,1
WRITE/DID_com_device),my_var
ENDDO
CLOSE/DID(my_com_device)
