Writing SerialPort

 It is possible to write data on a serial port through the DMIS code, for example:

 

DECL/CHAR,10,my_var

DECL/INTGR,ii

my_var=ASSIGN/'Here the value assigned!'

DID(my_com_device)=DEVICE/COMM,'com3:9600,n,8,1'

OPEN/DID(my_com_device),DIRECT,INPUT

DO/ii,1,10,1

WRITE/DID_com_device),my_var

ENDDO

CLOSE/DID(my_com_device)