Custom Canned Cycles for Automatic Feature Measurement

From ArcoWiki
Revision as of 13:30, 17 May 2018 by Admin (talk | contribs)
Jump to: navigation, search

Introduction

From version 3.6 are present some "Non-Dmis" commands that allow to perform automatic measurement of features following a geometrical path instead being driven by regular PTMEAS/ commands.
The features whom those news cycles applies are:

  • Circle
  • Cylinder
  • Planes

Activating the cycles

The automatic cycles can be set and activated by the measuring panel.
Opening one of the available features, a new icon is present, and this will show a dialog to define the different cycles.

Circle and Cylinders

For circles and cylinders features are available the following new automatic cycles:

Cycle Name Description Image
Pattern Helical Full Distributes the points according an helical path over 360° per round.
The starting position if from the application point of the feature.
The requested parameter are:
  • Pitch of the helix
  • Number of Sections to the measured
  • Starting Angle of the Helix (Based on Working Plane)
PatternHelicalFull.png
Pattern Helical Partial Distributes the points according a portion of an helical path over the specified angle spam.
The starting position if from the application point of the feature.
The requested parameter are:
  • Pitch of the helix
  • Starting Angle of the Helix (Based on Working Plane)
  • Angle to be covered by the points distribution
  • Number of Sections to the measured
PatternHelicalPartial.png
Pattern Section Full Distributes the points on parallel sections over 360°.
The starting position if from the application point of the feature.
The requested parameter are:
  • Distance between sections
  • Number of Sections to the measured
  • Starting Angle of the first point (Based on Working Plane)
PatternSectionFull.png
Pattern Section Partial Distributes the points on parallel sections over the specified angle spam.
The starting position if from the application point of the feature.
The requested parameter are:
  • Distance between sections
  • Number of Sections to the measured
  • Starting Angle of the first point (Based on Working Plane)
  • Angle to be covered by the points distribution
PatternSectionPartial.png
Pattern Section Optimized Distributes the points in the specified distance along the feature axis on parallel sections over the specified angle spam.
The starting position if from the application point of the feature.
The requested parameter are:
  • Starting Angle of the first point (Based on Working Plane)
  • Angle to be covered by the points distribution
  • Lenght to be covered
PatternSectionOptimized.png
Feature Bounded Helical Full Distributes the points according an helical path over 360° per round.
The starting position if from the intersection between the feature to be measured and the specified bounding feature .
The requested parameter are:
  • Filter between Nominal and Actual Features
  • Bounding Feature
  • Pitch of the helix
  • Number of Sections to the measured
  • Starting Angle of the Helix (Based on Working Plane)
PatternBoundedHelicalFull.png
Feature Bounded Helical Partial Distributes the points according a portion of an helical path over the specified angle spam.
The starting position if from the intersection between the feature to be measured and the specified bounding feature.
The requested parameter are:
  • Filter between Nominal and Actual Features
  • Bounding Feature
  • Pitch of the helix
  • Starting Angle of the Helix (Based on Working Plane)
  • Angle to be covered by the points distribution
  • Number of Sections to the measured
PatternBoundedHelicalPartial.png
Feature Bounded Section Full Distributes the points on parallel sections over 360°.
The starting position if from the intersection between the feature to be measured and the specified bounding feature .
The requested parameter are:
  • Filter between Nominal and Actual Features
  • Bounding Feature
  • Distance between sections
  • Number of Sections to the measured
  • Starting Angle of the first point (Based on Working Plane)
PatternBoundedSectionFull.png
Feature Bounded Section Partial Distributes the points on parallel sections over the specified angle spam.
The starting position if from the intersection between the feature to be measured and the specified bounding feature .
The requested parameter are:
  • Filter between Nominal and Actual Features
  • Bounding Feature
  • Distance between sections
  • Number of Sections to the measured
  • Starting Angle of the first point (Based on Working Plane)
  • Angle to be covered by the points distribution
PatternBoundedSectionPartial.png
Feature Bounded Section Optimized Distributes the points in the specified distance along the feature axis on parallel sections over the specified angle spam.
The starting position if from the intersection between the feature to be measured and the specified bounding feature .
The requested parameter are:
  • Filter between Nominal and Actual Features
  • Bounding Feature
  • Starting Angle of the first point (Based on Working Plane)
  • Angle to be covered by the points distribution
  • Lenght to be covered
PatternBoundedSectionOptimized.png


Planes