Excel Output format

It was added the ability to create an output in Excel format.
The input format (for the template) and the output format (the produced report) are compatible with any version of Excel 12 (Office 2007) or higher versions.
File:ReadMe image037.jpg The report will contain the data identified by their ID, specifically the data available can be chosen among the following:

• “ID”: It represents an auto-incremented value that is assigned to each line produced in output
• “TYPE”: It represents the type of the measured object (CIRCLE, POINT, DISTANCE, etc.)
• “NAME”: It represents the name of the measured object
• “ACTUAL”: It represents the actual value of the measure
• “NOMINAL”: It represents the nominal value of the measure
• “DEVIATION”: It represents the deviation of the measure
• “LOWERTOLERANCE”: It represents the lower limit of the tolerance
• “UPPERTOLERANCE”: It represents the upper limit of the tolerance
• “OUTOFTOLERANCE”: it represents the OOT value if present
• “DESCRIPTION”: to be implemented
• “OUTPUTTYPE”: the feature to run in output
• “CRITICITY”: to be implemented
• “MODIFIER”: tolerance modifier (if present)
• “INNEROUTER”: two possible values "INNER/OUTER" based on the value of the feature
• “DATUM”: the description of eventual datum
• “FULLDESCRIPTION”: to be implemented
• “PROJECTION”: the eventual projection axis
• “APPLIEDTO”: the eventual element to which is applied the tolerance