View source for Reporting Surface Profile Output with Max and Min deviation only

[[File:CurveProfile.png|thumb|293x293px]]
When reporting a '''GSURF''' or a '''GCURVE''' taken with large number of  data (example, with continuous scanning or laser scanner), the output document of a feature profile can be very long and almost meaningless since so many numbers are not interesting to understand the real deviation of the feature.

The most significant number are the MAX and MIN value of the deviation which represents the two peaks of the profile deviation.

In order to enable the output of the MIN/MAX deviation of either a '''GCURVE''' or '''GSURF''', it is necessary to go in the '''''Option''''' dialog, open the '''''Features''''' tab and select, in the '''''Feature Algorithm''''' the '''''Min/Max''''' option.


.

[[it:Segnalazione dell'output del profilo di superficie con solo la deviazione Max e Min]]
[[zh-cn:只报告最大和最小偏差的曲面轮廓输出]]
[[pt:Saída de perfil de superfície de relatório com desvio máximo e mínimo]]
[[de:Berichterstellung der Oberflächenprofilausgabe nur mit maximaler und minimaler Abweichung]]
[[es:Generación de informes del perfil de superficie con solo desviación máxima y mínima]]
[[en:Reporting Surface Profile Output with Max and Min deviation only]]

[[Category:ReadMe3.6]]